How to Check Car Oil

Motor oil is the lifeblood of your Chevrolet vehicle, and it’s crucial that you are certain that there’s just the right amount if you want to be certain all the engine’s internal moving parts, whether you are staying on the roads of Nederland or you are headed on a road trip outside of town. Keep reading to learn more about how to check car oil from the service team at Classic Chevrolet Beaumont!

Explore How to Check Oil Level in Cars with Classic Chevrolet Beaumont

When you have newer vehicles, there’s a good chance that the electronic oil monitors will let you know when you need an oil change, you don’t need to use traditional dipsticks, so you should start by checking your owner’s manual for the automaker’s recommendations. If you are doing the oil check manually, simply follow these steps:

1. Make sure the vehicle is parked on level ground and that the engine is turned off and cold.
2. Open the vehicle’s hood and find the dipstick.
3. Pull the dipstick out of the engine and wipe any oil from the end of it.
4. Re-insert the dipstick all the way back into its tube, then pull it out and look at both sides to see where the level is.

Your dipstick will always have some way of indicating the proper oil level; if the top of your oil streak is between two marks or within a cross-hatched area, the level is good. If not, you’ll need to add more oil.

You’ll need to buy the correct grade recommended in the owner’s manual, remove the oil filler cap, then add oil a little at a time until the dipstick indicates you’ve reached the proper level.

How to Check Car Oil & Why It’s Important

Oil is frequently overlooked, so the right oil level is crucial to your vehicle’s performance. Oil changes are recommended at least twice yearly, but that can vary according to the model and how it’s driven. Oil checks should be performed at least once a month so you can feel confident that there are no leaks. Keeping that in mind, if you notice your car’s hood is hot to the touch or steam billowing out from under the hood, you should schedule a service appointment without delay – as it’s possible you have an oil leak, and the engine is overheating.

Resetting Oil Change Light

Each of the vehicles has a specific process for resetting the oil change light, but the generalities are similar. It’s important that you don’t reset the oil change light if you haven’t actually changed your oil. If you accidentally miss an oil change, it can have negative impacts on your car in the long run.

How to Reset Oil Change Light: Step-by-Step:

1. Turn all systems of your car off, but leave the engine running.
2. Find the “reset” button or stick it on the dashboard (typically found near the speedometer and fuel gauge).
3. Hold the button down until the oil change light begins to flash (signs of resetting may differ per vehicle).
4. Turn the ignition off, wait a few seconds, then turn your car back on.

In this case, the oil change light should be reset; if you have any questions regarding how to reset your oil change light, don’t hesitate to reach out to our team!

Let the Classic Chevrolet Beaumont Service Team Keep Your Car Operating Properly!

With our service specials and expert advice, our service team is always ready to help. Schedule service with us today or contact us online for any help. We hope to be your go-to car service resource near Lumberton!